SCONTO 10% SUL PRIMO ORDINE - SCOPRI
FUSING
  • Electropneumatic warm spot-sticking desk machine, complete with:anti-repeater safety device, 5 pneumatically operated points which can be displaced to satisfy different models, electrically heated points equipped with electronic control of the temperature up to 200°, adjustable spot-sticking pressure, spot-sticking timing, working plate in magnetic...

  • TOP FUSING MACHINEAlternate fusing machine for shirts'' collar and cuffs with two frames 600 x 360 mm. with alternate movement. Installed power: 5 KwVoltage: 3~50Hz 230 V - 3+N~50Hz 400 V

  • Mod. 331 CONTINUOUS FUSING MACHINE

  • TOP FUSING MACHINES FOR COLLAR AND CUFFS Continous fusing machine for shirts' colalr and cuffs with laoding and unloading of pieces on the same side.

  • CONTINUOUS FUSING MACHINEIt is composed basically from: control panel, detachment of fused fabric, cooling device and double cylinder.

  • Mod. 330 THERMOFUSING MACHINE Allternate thermofusing machine with two frames 1500 x 750 mm. and alternate manual movement. 

  • AUTOMATIC UNLOADER Mod 976 has a fixed speed with exit speed as same as return track, 3 unloader widhts

  • Mod. 977 AUTOMATIC UNLOADER The automatic unloader, besides improving the amchine's performance, allows the forming of accurate bundles, respecting in full the pieces just fused. This model has adjustable speed of the track during the unloading and fast return track, 2 unloaders width

  • Mod. 985 AUTOMATIC LOADER WITH 2,3,4, TRACKS the automatic loader complete the fusing machine line, further improving its performance and amking the operator's work easier.

  • Mod. 978 AUTOMATIC UNLOADERS The automatic unloader, besides improving the machine's performance, allowes the forming of accurate bundles, respecting in full the pieces just fused.

  • Mod. 970 ELECTROPNEUMATIC FUSING-TAPE CUTTER For the cut of the tape on rolls. Following features: precision: obteined by an electronic movement flexibility: a programmer which allows to sets two different cutting measures and to set the number of pieces to be automatically cut exact cut: carried out by a blade to avoid the adhesive tightening in the...

  • Mod. 340 unit PROGRAMMABLE CONTINUOUS MACHINE It is a fusing machine made with a technological evolution. Kinematics motions and structure of heating system are project to reduce the running cost.The fusing machine is available with width of 1000 or 1400 mm, modular heating system, heart of the machine, make possible to fuse the garment using also a steam...

  • Mod. 341 unit PROGRAMMABLE CONTINUOUS MACHINE It is a fusing machine made with a technological evolution. Kinematics motions and structure of heating system are made to reduce the running cost, this is coming from years of test and experience from many years of Macpi research and development the fusing technology with a goal of quality and respect of the...

  • Continous fusing machine for waistbands or similar products. The machine uses waistbands fusing material on rolls and can work with one or two rolls. The fabric on which the fusing band material is being fused can be on a roll or in single pieces. The particular system of adjustable guides permits to place the waistband and the fusing tape in a simply and...

  • OPEN TOP SERIES The highest expression of our production. Highest flexibility togheter with high productivity. Designed with modular solutions to be equipped with stackers feeding stations and return belt device

  • X 600-1000-1400-1600 K-EL Effective worktop mm. 600-1000-1400-1600 High flexibility. Suitable for sportswers, jacket and shirts. Designed with modular solutions to be equipped with stackers feeding stations and return belt device.

  • Continous 45WS: digital control of all instruments electronical control of temperature opened on one side pressure roll in "silosol shore 60" to respect delicate fabrics cleaning system inside and outside the belts special long lasting belts high adaptability in every kind of use low electrical absorption very small dimension NO NEED OF COMPRESS AIR

  • CONT.45 - 60 TABLE-FUSING MACHINE Mini fusing press machine, suitable for little laboratories and for low production

  • MEPP series machines are equipped, unic on the market, with a patented pressure system that give to machine irreplaceable property: the pressure is not given by two rigid plans (system that don't give you uniformity)

  • Fusing-Pressing Machines mod. EMS 120 This little magnetic tensfer / fusing machine allow to fuse jacket. Parts and sportwears, it allow also to make transfer and sublimation. This machine doesn’t need air comprimed.

  • Mod. LAMINATOR Double heating system with pre-heating that concurs to fuse with very low temperature respect to the standard temperature pressure system with “OUT” function for very delicate woven inside and outside belts cleaning devices carbon/graphite lower belt separation blade automatic turn ON and turn OFF by digital timer

  • This little plate fusing machine allow to fuse shirts collar and cuffs, due to its very high power IDRAULIC pressure system up to 6 Kg./Sq.cm. Gives you the possibility to cover an huge range of various productions also if Huge pressure is required.

  • Continuous fusing machine for shirts Mod. X600SH 

  • Double working panel available in various dimensions, POLMONE patented pressure system. M.E.P.P. XTP , Suitable heat transfer applications, sublimation, strass application and high pressure and high temeperature jobs.

  • This model of fusing press for clothes and coats is the top of GI.EMME.PI’s production. This machine makes use of technological innovations which give it a complete reliability in every situation. The PR8 fusing press represents the state of the art in technology and offers a strong contribution to the optimization of production.  

  • The PR8/G fusing press for garments and coats is an intermediate model among GI.EMME.PI’s machinery. It was developed from the PR8 model’s, the basic version, which is very similar, except for the dimensions of the heating zone  

  • The PR8/M fusing press for clothes and jackets is the smallest model of the PR8 series. It is similar to the PR8/G model, from which it was developed, except for the size of the heating zone. To know more about technical features of the mini-press, you may follow the link below and see technical details.   

  • Mini fusing press PR45 The PR45 mini-fusing press is a small model for stores and small manufactories working with shirts and garments. It comes with long duration antistatic belts with no needs for regulations. No compressed air needed and electric working only.

  • This press model for fusing collars and cuffs of shirts is the perfect solution for starting a business or who has no need for high production. Among the features of this article there is a possibility to choose between normal heating or double heating: the PR10 model is available with conveyor belts and special seamless rolled strip.

  • The press model for fusing collars and cuffs of shirts PR4, is available with an upper and lower heating system. Compared to PR10 model, an additional heating system makes the residue of thermoadhesive always present in the soft cleaning system and easy removal.

  • The press for fusing collars and cuffs of shirts PR5N, is the top model in the line PR. The technological innovations of this machine allow you to have a reliable product to 100% in every situation characterized by technical excellence and unparalleled.

  • Among the models of presses for fusing of trouser belts we remind the MG30 machine: this fusing press is the result of important field studies and research of the best technologies designed specifically for the industrial sector.

Showing 1 - 32 of 32 items